IT Training | Business Training | Corporate Training | IT Higher Education | Business Higher Education

Library 5 : Technical General

Cisco® Related Series by MindLeaders

CCNA™™ Series

Total Time: 73 hours

This study guide and/or material is not sponsored by, endorsed by or affiliated with Cisco Systems, Inc. Cisco®, Cisco Systems®, CCDA™, CCNA™, CCDP™, CCNP™, CCIE™, CCSI™, the Cisco Systems logo and the CCIE logo are trademarks or registered trademarks of Cisco Systems, Inc. in the United States and certain other countries. All other trademarks are trademarks of their respective owners.

CCNA™: OSI Reference Model4 hoursSCOC01
CCNA™: OSI Reference Model describes the OSI reference model and uses it to explain types of networks and networking functions.
  • Introduction to Networking
  • The Upper OSI Layers
  • The Lower OSI Layers
  • Using a Layered Model


CCNA™: Networks and Data Transfer4 hoursSCOC02
CCNA™: Networks and Data Transfer uses the OSI reference model to show how networks encapsulate data and transfer it throughout a network. This course also introduces routing as a method of data transfer.
  • Communication between Layers
  • Connection and Data Flow
  • The Data Link Layer
  • Network Addressing


CCNA™: Local Area Networking4 hoursSCOC03
CCNA™: Local Area Networking describes the components and operation of Ethernets, Fast Ethernets, Token Ring and FDDI local area networks.
  • Introduction to LANs
  • Ethernet
  • Fast Ethernet
  • Token Ring and FDDI


CCNA™: Wide Area Networking4 hoursSCOC04
CCNA™: Wide Area Networking describes WAN components and protocols and how they function in a wide area network. Special emphasis is placed on PPP, ISDN, X.25, and Frame Relay.
  • Introduction to WANs
  • WAN Protocols
  • PPP
  • ISDN
  • X.25
  • Frame Relay


CCNA™: Using a Router4 hoursSCOC05
CCNA™: Using a Router introduces the different types of routing protocols, their use, and the function of routers.
  • Routing
  • Distance Vector Routing
  • Link State Routing
  • Understanding Routers


CCNA™: Introduction to IOS4 hoursSCOC06
CCNA™: Introduction to IOS explains the basic operation of the Internetwork Operating System.
  • Router Startup
  • Router Startup in Setup Mode
  • EXEC Mode Commands
  • Router Status
  • Loading Configuration Files


CCNA™: IOS Configuration4 hoursSCOC07
CCNA™: IOS Configuration shows how to configure passwords and banners, and introduces interface and protocol configurations for the Internetwork Operating System.
  • Passwords, Identification, and Banners
  • Configuring Interfaces
  • Sample Interface Configurations
  • Configuring Protocols


CCNA™: Network Management4 hoursSCOC08
CCNA™: Network Management shows how to set up and maintain a network system.
  • LAN Congestion
  • Network Segmentation
  • Network Management System
  • Cisco FastHub 300


CCNA™: Bridges and Switches4 hoursSCOC09
CCNA™: Bridges and Switches shows how to build and operate network bridges and switches.
  • The Spanning Tree
  • Bridges
  • Switches
  • ATM Switching
  • Cisco Catalyst 1900/2820 Switches


CCNA™: TCP/IP Networking4 hoursSCOC10
CCNA™: TCP/IP Networking explains the functions of TCP/IP and how to manage it and other transport and network layer protocols.
  • Overview of TCP/IP
  • Transport Layer Protocols
  • TCP Specifics
  • Internet Layer Protocols


CCNA™: IP Addressing4 hoursSCOC11
CCNA™: IP Addressing shows how to assign and use IP addresses.
  • The IP Address
  • Subnetting
  • Supernetting


CCNA™: IP Routing4 hoursSCOC12
CCNA™: IP Routing explains how to configure IP addresses and implement IGRP routing protocol.
  • Configuring IP Addresses
  • Basic Routing Configurations
  • Interior Gateway Routing Protocols
  • Exterior Gateway Routing Protocols


CCNA™: IPX Networking4 hoursSCOC13
CCNA™: IPX Networking explains how to operate and manage Novell's IPX protocol and addresses.
  • IPX Protocols
  • IPX Addressing and Encapsulation
  • Configuring IPX
  • Showing IPX Configurations


CCNA™: Network Security and Control4 hoursSCOC14
CCNA™: Network Security and Control describes the components and operation of access lists for filtering network traffic.
  • Introduction to Network Security
  • Introduction to Access Lists
  • Configuring IP Access Lists
  • Configuring IPX Access Lists
  • Showing Access Lists


CCNA™: Additional Configurations5 hoursSCOC15
CCNA™: Additional Configurations describes how to configure and verify ISDN, X.25, and Frame Relay routing. It also explains the operation of Frame Relay and other components of the network.
  • ISDN
  • Showing ISDN Configurations
  • X.25
  • Frame Relay
  • Features


CCNA™: Exam Preparation 14 hoursSCOC16
CCNA™: Exam Preparation 1 provides practice exams that mimic the written portion of the CCNA™ test.
  • Exam Procedures
  • Practice Exam 1
  • Practice Exam 2


CCNA™: Exam Preparation 24 hoursSCOC17
CCNA™: Exam Preparation 2 provides practice exams that mimic the written portion of the CCNA™ test.
  • Practice Exam 4
  • Practice Exam 5
  • Practice Exam 6


CCNA™: Numbering Systems4 hoursSCOC18
CCNA™: Numbering Systems introduces the alternative base numbering systems that are used in Cisco management.
  • Decimal
  • Binary
  • Hexadecimal
  • Conversion Exercises

Back






©2002 Purpletrain.Com Pte Ltd, Purpletrain.Com Logo and Informatics Holdings Ltd and the Informatics logo are registered trademarks of Informatics Holdings Ltd and Purpletrain.Com Pte Ltd. Informatics Holdings and Purpletrain.Com is a trademark herein used under license. All other brand names mentioned herein are used for identification purposes only and are trademarks of their respective owners.

This study guide and/or material is not sponsored by endorsed by or affiliated with Cisco Systems, Inc. Cisco®, Cisco Systems®, CCDA™, CCNA™, CCDP™, CCNP™, CCIE™, CCSI™, the Cisco Systems logo and the CCIE logo are trademarks or registered trademarks of Cisco Systems, Inc. in the United States and certain other countries. All other trademarks are trademarks of their respective owners.